Xylem SI Analytics TITRONIC 500

To Next Page

To Previous Page

132

5 System settings

Fig. 97

From the main menu (Fig. 97) you can access the system settings with <SYS> (Fig. 98).

Fig. 98

Setting the national language was already described in  2.5.

Interchangeable Unit - Reagents 5.1

Each interchangeable unit is equipped with an RFID transponder. This transponder can be used to store the

following information (Fig. 99 - Fig. 101)

 Unit size: (the default setting, cannot be changed)

 Unit ID: (default setting, cannot be changed)

 Reagent name: (default: blank)

 Concentration: (default: 1.000000)

 Concentration determined on: (Date)

 To be used until: (Date)

 Opened/Produced on: (Date)

 Test according to ISO 8655: (Date)

 Charge description: (default: no charge)

 Last modification: (Date)

Xylem SI Analytics TITRONIC 500 - 5 System Settings