106
Menu Structure 3.5
The menu screens shown in this manual serve as an example and may differ from what you see!
There are 4 selection menus:
Start or main menu
Method parameters
Method selection
System settings.
After power-up, the main menu is always the first menu to appear.
The method displayed will always be the last method that was used (Fig. 31).
Fig. 31
Pressing <START> will result in the immediate execution of the method shown.
<EDIT> will take you to the method parameters (Fig. 32).
Fig. 32
At this point you can
modify the current method
create a new method
call and memorise standard methods
copy or delete an existing method
Use <↓> and <↑> to select the submenus.
Confirm your selection with <ENTER>/<OK>.
<ESC> will take you back to the main menu.
To Next Page
Loading...
