SonTek, a Xylem brand
RiverSurveyor S5/M9 System Manual (February 2013)
31
When the connection is established, the System Tab is displayed as shown in Figure 28. This
tab allows you to enter Site Information, System Settings and Measurement Settings; download
files from the Recorder and perform Pre-Measurement Tests. The COM port and baud rate
( ) are shown at the top.
Figure 28. System Tab Following Connection
6.6. Site Information
Site information can be entered by clicking Change Site Information. This opens a popup win-
dow that allows you to enter site specific details. (Figure 29). The maximum number of charac-
ters allowed for each data field is in parentheses. Entering more than the maximum allowable
characters will display an error message that will prompt you to enter the information within the
allotted number of characters. This information can be changed during post processing
.
To Next Page
Loading...
Need help?
General
