XYZ Machine Tools ProtoTRAK SLX CNC - Page 23

19
XYZ Machine Tools
ProTURN SLX 1630 ProtoTRAK SLX CNC Safety, Installation, Service & Parts List Manual
CAUTION!
Failure to manually activate the pump at the beginning of each day, or allowing the Auto
Lube to run dry may cause severe damage to the 1630 lathe way surfaces and ballscrews.
The settings for the lube pump can be viewed by doing the following: press Service
Codes, press “A” (software), press Code 313. This screen lists the values
programmed for the cycle time and discharge time.