XYZ Machine Tools ProtoTRAK SLX CNC User Manual

2
XYZ Machine Tools
ProTURN SLX 1630 ProtoTRAK SLX CNC Safety, Installation, Service & Parts List Manual
1.2 Safety Precautions
WARNING!
Use only chucks which are rated to the maximum RPM of the lathe.
1. Do not operate this machine before the PROTURN SLX 1630 ProtoTRAK SLX CNC
Programming, Operating and Care Manual have been studied and understood.
2. Read and study this PROTURN SLX 1630 Safety, Installation, Maintenance, Service &
Parts List Manual. Be certain that every operator understands the operation and
safety requirements of this machine before servicing.
3. Do not run this machine without knowing the function of every control key, button,
knob, or handle. Ask your supervisor or a qualified instructor for help when needed.
4. Protect your eyes. Wear approved safety glasses (with side shields) at all times. Do
not rely on the lexan vision panels for eye protection.
5. Don't get caught in moving parts. Before operating this machine, remove all jewelry,
including watches and rings, neckties, and any loose-fitting clothing.
6. Keep your hair away from moving parts. Wear adequate safety headgear.
7. Protect your feet. Wear safety shoes with oil-resistant, anti-skid soles, and steel
toes.
8. Take off gloves before you start the machine. Gloves are easily caught in moving
parts.
9. Remove all tools (wrenches, chuck keys, etc.) from the machine before you start.
Loose items can become dangerous flying projectiles.
10. Never operate any machine tool after consuming alcoholic beverages, or taking
strong medications, or while using non-prescription drugs.
11. Protect your hands. Stop the machine spindle and ensure that the CNC control is in
the STOP mode:
 Before changing tools.
 Before changing parts.
 Before you clear away the chips, oil or coolant. Always use a chip scraper or
brush.
 Before you make an adjustment to the part, chuck, coolant nozzle or take
measurements.
 Before you open safeguards (protective shields, etc.). Never reach for the
part, tool, or fixture around a safeguard.
12. Protect your eyes and the machine as well. Don't use a compressed air hose to
remove the chips or clean the machine (oil, coolant, etc.).
13. Stop and disconnect the power to the machine before you change belts, pulley, gears, etc.
14. Keep work area well lighted. Ask for additional light if needed.
15. Do not lean on the machine while it is running.

XYZ Machine Tools ProtoTRAK SLX CNC Specifications

General

Brand	XYZ Machine Tools
Model	ProtoTRAK SLX CNC
Category	Industrial Equipment
Language	English