Connecting to AC Power and Charging the Battery
Fully charge the battery before starting to use your Yakumo deltaX GPS for the
first time.
1. Plug the converter to the AC adapter.
2. Connect the mini-USB end of the AC adapter to the bottom of your Yakumo
deltaX GPS and the other end to a wall outlet.
Converte
3. The charge indicator glows amber when charging is in progress. Do not
disconnect your Yakumo deltaX GPS from AC power until the battery is
fully charged, as indicated by the amber indicator turning into green. This
will take a couple of hours.
Whenever possible, keep your Yakumo deltaX GPS connected to the AC
adapter and a power source. Doing so keeps the battery charged.
8
To Next Page
Loading...
General