1.3 Turning Your Yakumo deltaX GPS On and Off
After the initial startup, your Yakumo deltaX GPS enters a suspend state when
you turn it off and resumes when you turn it on.
Turning Off to Suspend
You suspend your Yakumo deltaX GPS by briefly pressing the power button on
the side of your Yakumo deltaX GPS.
By default, your Yakumo deltaX GPS will also automatically suspend after 3
minutes of inactivity when operating on battery power. (To change these
settings, tap
Settings System tab Power icon Advanced tab.)
Turning On to Resume
You resume your Yakumo deltaX GPS by briefly pressing the power button.
You can also press one of the program buttons to resume.
1.4 Installing Microsoft ActiveSync
CAUTION:
Before installation, make sure that you have Microsoft Outlook installed on your desktop
computer. If you do not have Outlook or your version of Outlook is earlier than the
version provided on the Companion CD, install Outlook from the Companion CD.
Do not connect your Yakumo deltaX GPS to your desktop computer before ActiveSync
is installed.
During the New Partnership setup, select “Synchronize with this desktop computer.” Do
not select “Synchronize with Microsoft Mobile Information Server and/or this desktop
computer” unless you are sure that your company is running Microsoft Mobile
Information Server 2002 or later. Contact your network administrator or ISP for detailed
information.
You can use Microsoft ActiveSync technology to synchronize information on
your desktop computer and/or a Microsoft Exchange Server with the
information on your Yakumo deltaX GPS. ActiveSync compares the
information on your Yakumo deltaX GPS with the information on the desktop
computer and/or the server and updates all locations, keeping you up-to-date
with the most recent information.
9
To Next Page
Loading...
General