9. Remove the storage card, if inserted. Never delete the contents in the
storage card, or the backup data will be lost and you cannot restore data with
this card.
To Restore Data
CAUTION:
If you have created files on your Yakumo deltaX GPS since the last backup and do not
want to delete these files during the restore process, move the files from your Yakumo
deltaX GPS to your desktop computer or to a storage card before restoring data.
When you restore data, make sure that your Yakumo deltaX GPS has the same
regional settings that it had when you completed the backup.
1. Disconnect your Yakumo deltaX GPS from your desktop computer, if
connected.
2. Stop all running programs by tapping
Settings System tab
Memory icon Running Programs tab Stop All.
3. Insert the storage card if your data were backed up in the card.
4. Tap
Programs eBackup icon to switch to the program.
5. Tap
Restore and then Next.
6. Select the storage media containing your backup data and tap
Next.
7. Select the items you want to restore.
8. Tap
Restore.
9. Tap
Yes. The program will start restoring data and then display a message on
the screen when restoring is completed.
10. Reset your Yakumo deltaX GPS as described in section 7.1.
eViewer (optional)
Tap
Programs eViewer icon to switch to the program.
This program provides an easy way to view image files in jpg and bmp formats.
With eViewer, you can:
View image files in thumbnail or list view.
Delete, rename, cut or copy an image file.
75
To Next Page
Loading...
General