You can also select the events for waking up your Yakumo deltaX GPS. Check
the desired item(s). (The default settings are all enabled.)
Application buttons
Record Button
SD/MMC Card insertion/removal
USB Plug-In
Power-Saving Tips
Follow these suggestions to maximize the battery’s operating time, particularly
when you are relying solely on the battery power for extended time periods.
Suspend frequently.
By default, the screen backlight will automatically turn off and the Yakumo
deltaX GPS will also turn off when it has been idle for a period of time. You
can shorten the length of the idle time using
Settings System tab
Power Advanced tab to set up.
Press the power button to turn off your Yakumo deltaX GPS when it is not
in use, even for a short time. You can also manually turn off the backlight by
pressing and holding the power button.
Turn off functions not needed or adjust settings.
Lower the volume.
Do not enable sounds or light flashing except for the most necessary
notifications. (Tap
Settings Personal tab Sounds &
Notifications
icon to set up.)
Remove the SD/MMC card, if installed, from the slot if you are not
using it.
Avoid power-consuming situations such as:
When connecting your Yakumo deltaX GPS to your desktop computer
(Your Yakumo deltaX GPS will not auto-suspend while it is
connected.)
When using a modem or other peripheral
When monitoring infrared transfers (Although you can set your
Yakumo deltaX GPS to constantly monitor the IR port for files sent
from other devices, doing so will quickly drain your battery.)
When playing sound or music
When recording.
31
To Next Page
Loading...
General