YAKUMO DELTAX GPS User Manual

Creating a Modem Connection
1. Tap  Settings  Connections tab  Connections.
2. Follow the instructions in the
New Connection wizard. To view additional
settings, tap
.
3. In
My ISP or My Work Network, tap Add a new modem connection.
NOTE: To change modem connection settings, in either My ISP or My Work Network, tap
Manage existing connections. Select the desired modem connection, tap Settings and
follow the instructions on the screen.
Starting and Ending a Modem Connection
To start the connection, install the modem and connect the modem cable. Then,
use the desired program. For example, switch to Pocket Internet Explorer and
browse to a Web page. Your Yakumo deltaX GPS will automatically connect.
To end the connection, tap the icon
on the Navigation bar and then tap
Disconnect.
Network (Ethernet) Card Connection
Use a network (Ethernet) card to connect directly to a network. You do not need
to create a new connection on your Yakumo deltaX GPS. Insert a network card
and you can create a connection.
Before creating the connection, you need to:
 Have a network card (SD IO). (For installation information, see the
documentation supplied with the product.)
 Obtain the following information from your network administrator: user
name, password and domain name.
Creating a Network Card Connection
1. Insert the network card into your Yakumo deltaX GPS.
2. The first time you insert the card, Network Settings appears automatically
so that you can configure the network card. If it does not appear or to change
settings later, tap
 Settings  Connections tab  Connections 
Advanced tab  Network Card.
78

YAKUMO DELTAX GPS Specifications

General

Brand	YAKUMO
Model	DELTAX GPS
Category	PDA
Language	English