On your Yakumo deltaX GPS, you need to create a partnership between your
Yakumo deltaX GPS and the desktop computer using one of the direct
connection methods (USB cable or infrared connection). You must also
configure a connection on your Yakumo deltaX GPS as described in section 6.1.
On your desktop computer, you need to ensure the following:
The desktop computer or network server is configured to allow your
Yakumo deltaX GPS to connect. Depending on the version of Windows
running on the desktop computer, you may need to install and configure
Remote Access Services or Dial-Up Networking on the desktop computer.
ActiveSync is configured to allow a network connection. For more
information, see ActiveSync Help on your desktop computer.
If you are using a modem on your desktop computer, turn the modem on
before you leave.
Leave your desktop computer on and be sure you logged on under the same
user name that you used when you created the partnership.
Your PIM program and email program (Microsoft Outlook or Microsoft
Exchange) should be running correctly.
62
To Next Page
Loading...
General