Yale Kyra Pro - Operation Settings; 2.1 Administrator and user ID; 2.2 Factory default administrator password; 2.3 Changing of administrator code

3 4
3
2
1
4
1
1 2 3 4 5 6 7 8 9 10
Notes
Operation setting
2.1 Administrator and user ID
2.3 Changing of administrator code
Administrator code
User code (2 digits)
2.2 Factory default administrator password
Administrator
code
Step
or
Administrator code is required for all menu operations
Chines Mode: 6-10digits/English Mode:4-10digits
System generates user ID automatically during registration of
fingerprint, PIN and card for addressing purpose; (fingerprint user ID,
PIN and card user ID from 00~99 each)
Default administrator code: 1 2 3 4 5 6 7 8 9 0
For optimum security, please change the administrator code before using
the product,
Administrator code is required for all menu operations.
new administrator code new administrator code
Only one administrator code can be set and the administrator code is required for user
management and various function settings.
Changing of
administrator
code
2.4 Factory reset
1. Press and push upward to remove the battery cover
2. Remove the battery from the battery compartment.
3. Use a tool to press and hold the [RST] button until the completion of
step 5.
4. Reinstall the battery.
5. Release the [RST] button when you hear "Completed" (around 3
seconds after the battery is installed). Factory reset is completed now.