3-30
GB
402075
403023
EMU00311
PROCEDURE
1) Place the gear shift lever in the neu-
tral position.
2) Push the tilt lock lever down to
release.
3) Pull up the shallow water lever.
4) Slightly tilt up the engine. The tilt-
support bar will lock automatically,
supporting the engine in a partially
raised position.
NOTE:
This motor has 2 positions for shallow
water cruising.
5) When lowering the engine, set the tilt-
lock lever and shallow water lever to
the lock position. Slightly tilt up the
engine until the tilt-support bar auto-
matically returns to the free position.
Then, slowly lower the engine to the
normal position.
6L3-9-76A0-3B 2/27/03 10:21 AM Page 26
To Next Page
