2-7
GB
EMC44010
RECOIL STARTER HANDLE
(If equipped)
Pull the handle gently until resistance is
felt. Then vigorously pull the handle
straight out to crank the engine to start it.
EMC60010
TILLER HANDLE
(for Tiller control model)
Moving the tiller handle sideways to
adjust the steering direction.
EMC64010
THROTTLE FRICTION KNOB / SCREW
(for Tiller control model)
A friction device in the tiller handle pro-
vides resistance to movement of the
throttle grip. This is adjustable for opera-
tor preference. An adjusting screw/bolt is
located within the tiller handle.
To increase the resistance:
Turn the adjusting screw/bolt clockwise.
To decrease the resistance:
Turn the adjusting screw/bolt counter-
clockwise.
When constant speed is desired, tighten
the adjusting screw/bolt to maintain the
desired throttle setting.
503015
502011
6L3-9-76A0-2 2/27/03 10:20 AM Page 16
To Next Page
Loading...
