3-35
GB
EMU00301
PROCEDURE FOR TILTING DOWN
Manual tilt model 20/25N
1) Return the shallow water lever.
2) Slightly tilt up the engine until the tilt
support bar is released automatically.
3) Tilt down the engine.
EMU00297
PROCEDURE FOR TILTING DOWN
Manual tilt model 30
1) Return the tilt support lever tilting up
the engine slightly.
2) Tilt down the engine.
EMU00305
PROCEDURE FOR TILTING DOWN
Power trim/tilt model
1) Push the power trim/tilt switch “UP”
until the engine is supported by the
tilt rod.
2) Pull out the tilt support knob.
3) Push the power trim/tilt switch “DN”
(Down) to lower the engine to the
desired position.
6L3-9-76A0-3B 2/27/03 10:21 AM Page 36
To Next Page
Loading...
