Why is bass not spatial when BAL (balanced input) is selected on Yamaha Amplifier?
If the bass is not spatial when BAL (balanced input) is selected on your Yamaha Amplifier, the polarity may be incorrect. Select the correct polarity with the PHASE selector.
General| Type | Integrated amplifier |
|---|---|
| Power Output | 90 W + 90 W (8 ohms, 20 Hz-20 kHz, 0.07% THD) |
| Power Output (4 ohms) | 150 W + 150 W (4 ohms, 20 Hz-20 kHz, 0.07% THD) |
| Frequency Response | 5 Hz-100 kHz (+0 dB/-3 dB) |
| Input Sensitivity | 200 mV/47 k-ohms (CD) |
| Input Impedance | 47 k-ohms |
| Dimensions | 435 x 157 x 463mm (W x H x D) |
| Weight | 23.4 kg |
| Phono Input | Yes |
| Damping Factor | 250 |
Details buttons, indicators, and jacks on the front panel.
Explains input/output terminals and switches on the rear panel.
Information on remote operation, battery installation, and operating range.
Guides on connecting speakers using different terminal types.
Instructions for bi-wiring speakers and connecting the power cable.
How to connect components using balanced XLR jacks.
Connects for operating the unit remotely or between Yamaha components.
Synchronizes unit operations with other components via trigger signals.
Solutions for common problems and operational errors.
Recommendations for cleaning and maintaining the unit's finish.
Essential guidelines for safe operation and maintenance of the unit.
Regulatory compliance information for US customers.
Precautions for installation, operation, and handling the unit and remote.
To Next Page
