24
2
5 4
3 1,7
3 Select the desired input source by using INPUT.
(For video sources, turn the TV/monitor ON.)
See page 26 if you are using an external decoder or
playing a tape or an MD.
Front panel Remote control
or
The name of the selected input source will appear on the
display.
BASIC OPERATIONS
TO PLAY A SOURCE
Notes
• Set the SELECTOR DIAL to the AMP/TUN position on the remote control transmitter.
• To operate the tuner, CD player, DVD/LD player, tape deck, MD recorder, or other components using this remote control transmit-
ter, set the SELECTOR DIAL to the component to be used. (See “SETUP CODES” on page 42.)
1 Set VOLUME to the “∞” position.
Front panel
2 Turn the power on.
Front panel Remote control
or
2
7
3,4
DSP-A595-3 3/25/99, 3:53 PM24
To Next Page
Loading...
Need help?
General
