46
REMOTE CONTROL FEATURES
Returning to the Factory Setting
■ To return to the factory-set codes
in all positions
1 Press j / i at the same time for about
4 seconds.
The indicator flashes twice.
2 Enter the code number “9990”.
Make sure that the indicator flashes twice.
■ To return to the factory-set codes
in each position
1 Set the selector dial to the
position for the
component to be returned
to the factory setting.
2 Press j / i at the same time for about
4 seconds.
The indicator flashes twice.
3 Enter the code number “0000”.
Make sure that the indicator flashes twice.
The following codes are factory set.
Selector dial position Component Code Set component Set code
TV TV 0101
CBL/SAT Satellite tuner 0006
VCR VCR 0002
DVD/LD DVD player 0008 (YAMAHA DVD player)
CD CD player 0005 (YAMAHA CD player)
TAPE/MD MD recorder 0024 (YAMAHA MD recorder)
We recommend that you write all the code numbers you have set on the table above.
0108AX620(GB)_40-46_EN 1/23/1, 9:28 AM46
To Next Page
Loading...
Need help?
General
