E-99
SOUND FIELD
PROGRAMS
English
DIGITAL SOUND FIELD PARAMETER DESCRIPTIONS
■ REV. TIME (Reverberation Time)
Function This parameter adjusts the amount of time it takes for the dense, subsequent reverberation sound to decay by 60 dB (at 1
kHz). This changes the apparent size of the acoustic environment over an extremely wide range.
Control range 1.0 – 5.0 s
Description Set a longer reverberation time for “dead” sources and listening room environments and a shorter time for “live” sources
and listening room environments.
■ REV. DELAY (Reverberation Delay)
Function This parameter adjusts the time difference between the beginning of the direct sound and the beginning of the reverbera-
tion sound.
Control range 0 – 250 ms
Description The larger the value, the later the reverberation sound begins. A later reverberation sound makes you feel like you are in a
larger acoustic environment.
■ REV. LEVEL (Reverberation Level)
Function This parameter adjusts the volume of the reverberation sound.
Control range 0 – 100%
Description The larger the value, the stronger the reverberation becomes.
Level
Source sound
REV. LEVEL
Time
Time
60 dB 60 dB 60 dB
Reverberation
Source sound
Primary reflected sound
Time Time
Reverberation
REV. TIME REV. TIME REV. TIME
Short reverberation
Sound source
Long reverberation
Small value = 1.0 s Large value = 5.0 s
Level
Level
Level
Time
(dB)
60 dB
Level
Source sound
Reverberation
REV. DELAY
REV. TIME
To Next Page
Loading...
Need help?
General
