E-84
ZONE 2
Remote control in ZONE 2
In the second (Zone 2) room, the supplied remote control can be used as the Zone 2 remote control. You can select the input source and
control the component which is located in the main room directly from the second room regardless of the listening condition in the main
room.
1
1
Press SOURCE SELECT to display “Zone2” in the display window.
2
2
Use the input selector buttons to select the input source you want to listen to.
The display window shows “2: name of selected input” if the remote control is in the Zone 2 mode.
Example: When DVD is selected
3
3
You can control the component using the component control area buttons.
Note
• VOLUME +/– can be used to adjust the volume if you set the SET MENU item “17 ZONE2 SET”, “ZONE2 OUT” to “VAR.” (see page
63).
SOURCE
SELECT
Zone2
V–AUX TUNER PHONO
CABLE SAT MD/TAPE CD–R CD
D–TV/LD VCR 1 VCR 2 VCR3/DVR DVD
2:DVD
To Next Page
Loading...
Need help?
General
