E-49
BASIC OPERATIONS
English
BASIC PLAYBACK
■ Virtual CINEMA DSP
With the Virtual CINEMA DSP, you can enjoy all the DSP
programs without rear speakers. It creates the virtual speakers to
reproduce the natural sound field.
The sound field processing is changed to the Virtual CINEMA DSP
mode according to the selected DSP program by setting “1C REAR
L/R SP” on the SET MENU to “NONE”.
Caution
• This unit is not set in the virtual CINEMA DSP mode even if “1C
REAR L/R SP” is set to “NONE” in the following cases:
1 when the 8ch Stereo, DOLBY DIGITAL Normal, PRO
LOGIC Normal, PRO LOGIC
, DTS Normal or Neo: 6
program is selected;
2 when the sound effect is turned off
3 when connecting the headphones
4 when 6CH INPUT is selected as the input source
5 when over 96 kHz sampling digital signals are being input
■ SILENT CINEMA DSP
You can enjoy the powerful sound field as if there were actual
speakers with the SILENT CINEMA DSP. You can listen to
SILENT CINEMA DSP by connecting your headphones to the
PHONES jack while the digital sound field processor is on. Enjoy
all the DSP program using the headphones. The “SILENT”
indicator lights up on the front panel display. (If the sound effect is
off, you listen to the source with normal stereo reproduction.)
Caution
• This unit is not set in the SILENT CINEMA DSP mode even if the
sound effect is on in the following cases:
1 when over 96 kHz sampling digital signals are being input
2 when 6CH INPUT is selected as the input source
■ DTS 96/24
Be aware the following points when the DTS 96/24 signal is being
input.
• Select the subprogram “NORMAL” in “DOLBY DIGITAL/DTS
SURROUND” among CINEMA DSP programs in order to decode
the DTS 96/24 signals correctly.
• Press EX/ES while the DTS 96/24 signals are being input for
matrix 6.1 playback.
• DTS 96/24 decoder functions only for those two cases described
above. In other cases, necessary process such as sound effect
addition and down mixing is given depending on the sampling
frequency of the input signals.
96kHz
/
24bit
indicator lights up when the DTS 96/24 signal is input
to this unit.
To Next Page
Loading...
Need help?
General
