18
DTX-PRO Owner’s Manual
Turning On or Off
Setup Guide
Turning Off
1.
If you are connected to a PA system:
Turn the external speakers off.
2.
Turn the [MASTER VOLUME] knob fully
counterclockwise to lower the volume to its
minimum.
3.
Hold down the [ ] (Standby/On) switch.
The DTX-PRO is in Standby and the display and lights
are off.
NOTICE
• The DTX-PRO automatically stores settings when the power is turned off, so do not unplug the AC adaptor until the LCD
screen is turned off completely.
• Unsaved Kit data will be lost, so always save (Store) data before turning the power off.
120
To Next Page
Loading...
