E
4-22
5) With the outboard motor in a vertical
position, and using a flexible or pressur-
ized filling device, inject the gear oil into
the gear oil drain screw hole.
6) When the oil begins to flow out of the
oil level plug hole, insert and tighten the
oil level plug.
7) Insert and tighten the gear oil drain
screw.
Gear oil grade and capacity:
See “Specifications” in this chapter.
601022
EMU01510
CLEANING FUEL TANK
w
Gasoline (petrol) is highly flammable,
and its vapors are flammable and explo-
sive.
8 If you have any question about proper-
ly doing this procedure, consult your
Yamaha dealer.
8 Keep away from sparks, cigarettes,
flames or other sources of ignition
when cleaning the fuel tank.
8 Remove the fuel tank from the boat
before cleaning it. Work only outdoors
in an area with good ventilation.
8 Wipe up any spilled fuel immediately.
8 Reassemble the fuel tank carefully.
Improper assembly can result in a fuel
leak, which could result in a fire or
explosion hazard.
8 Dispose of old gasoline (petrol)
according to local regulations.
63V-9-K0A0-4B 4/4/02 4:54 PM Page 22
To Next Page
Loading...
