E
3-2
EMU01478
MOUNTING THE OUTBOARD MOTOR
w
8 Overpowering a boat may cause
severe instability. Do not install an out-
board motor with more horsepower
than the maximum rating on the
capacity plate of the boat. If the boat
does not have a capacity plate, consult
the boat manufacturer.
8 The information presented in this sec-
tion is intended as reference only. It is
not possible to provide complete
instructions for every possible
boat/motor combination. Proper
mounting depends in part on experi-
ence and the specific boat/motor com-
bination.
w
Improper mounting of the outboard
motor could result in hazardous condi-
tions such as poor handling, loss of con-
trol, or fire hazards. Observe the follow-
ing:
8 For permanently mounted models,
your dealer or other person experi-
enced in proper rigging should mount
the motor. If you are mounting the
motor yourself, you should be trained
by an experienced person.
8 For portable models, your dealer or
other person experienced in proper
outboard motor mounting should
show you how to mount your motor.
63V-9-K0A0-3A 4/4/02 4:49 PM Page 6
To Next Page
Loading...
