E
5-7
208012
001263
208014
EMU00426
Emergency starting engine
1) Remove the top cowling.
2) Remove the starter by removing the
bolts.
3) Disconnect the start-in-gear protection
cable from the starter if the cable is
equipped.
4) Prepare the engine for starting. See
“STARTING ENGINE” for procedures.
Be sure the engine is in Neutral.
5) Insert the knotted end of the emer-
gency starter rope into the notch in the
flywheel rotor and wind the rope several
turns clockwise.
6) Give a strong pull straight out to crank
the engine. Repeat if necessary.
63V-9-K0A0-5 4/4/02 4:55 PM Page 20
To Next Page
Loading...
