E
3-13
209011
9.9, 15
EMU00241¯
7) Pull out the choke knob completely
when the engine is cold. After the
engine starts, set the choke knob to the
2nd or 3rd position for warming up the
cold engine. After warming up the
engine, set the choke knob to the origi-
nal position.
NOTE:
8 It is not necessary to use the choke when
restarting a hot engine.
8 If the choke knob is left pulled out, the
engine will stall.
8) Pull the starter handle slowly until you
feel resistance. Then, give a strong pull
straight out to start the engine. Repeat
it, if necessary.
9) After the engine starts, return the
starter handle slowly to the original
position before releasing it.
63V-9-K0A0-3A 4/4/02 4:49 PM Page 28
To Next Page
Loading...
