Trouble Recovery
111
replacement could result in a fuel leak,
which could result in a fire or explosion
hazard.
If the water separator-alert indicator on the
Command Link tachometer blinks, perform
the following procedure.
1. Stop the engine.
2. Remove the top cowling.
3. Remove the holder.
F115, LF115, F115A1, FL115A1
F150, LF150, F150A1, FL150A1
4. Disconnect the water detection switch
coupler. NOTICE: Be careful not to get
any water on the water detection
switch coupler, otherwise a malfunc-
tion could occur.
[ECM01950]
F115, LF115, F115A1, FL115A1
1. Water separator-alert indicator
1. Holder
ZMU07491
1
1. Holder
1. Water detection switch coupler
1
ZMU07392
U63P1DE0.book Page 111 Tuesday, March 29, 2011 7:15 PM
©2019 Yamaha Motor Corporation, U.S.A.
To Next Page
