EasyManuals Logo

Yamaha F115 User Manual

Yamaha F115
126 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #64 background imageLoading...
Page #64 background image
Engine control system
58
EMU26803
Alert system
NOTICE
ECM00091
Do not continue to operate the engine if a
alert device has activated. Consult your
Yamaha dealer if the problem cannot be lo-
cated and corrected.
EMU30346
Overheat alert (twin engines)
This engine has an overheat-alert device. If
the engine temperature rises too high, the
alert device will activate.
The engine speed will automatically de-
crease to 20003500 r/min.
The overheat-alert indicator will light or
blink.
The buzzer will sound.
If the alert system has activated, stop the en-
gine and check the cooling water inlets:
Check trim angle to be sure that the cooling
water inlet is submerged.
Check the cooling water inlet for clogging.
Dual engine drive users:
If the overheat alert system of one engine ac-
tivates, the engine will slow down. To switch
off the alert activation on the engine not affect-
ed by overheating, turn off the main switch of
the engine overheating. If the alert system
has activated, stop the engine and tilt the out-
board motor up to check the cooling water in-
let for clogging. If the alert system has still
activated, tilt the overheated outboard motor
up and return to the port.
EMU30356
Low oil pressure alert
If the oil pressure drops too low, the alert de-
vice will activate.
ZMU01757
OFF START
ON
OFF START
ON
ZMU04584
ZMU02630
U63P1DE0.book Page 58 Tuesday, March 29, 2011 7:15 PM
©2019 Yamaha Motor Corporation, U.S.A.

Table of Contents

Other manuals for Yamaha F115

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yamaha F115 and is the answer not in the manual?

Yamaha F115 Specifications

General IconGeneral
Displacement1832cc
Prop Shaft Horsepower115 hp
Alternator Output35 Amp
Gear Ratio2.15:1
Starting SystemElectric
Fuel RecommendationRegular Unleaded (Minimum Pump Octane 87)
Oil RecommendationYamalube 4M
ExhaustThrough Propeller
LubricationWet Sump
SteeringRemote
Cooling SystemWater Cooled
Bore x Stroke81.0 x 88.9 mm
Full Throttle RPM Range5300-6300 rpm
Fuel Induction SystemEFI (Electronic Fuel Injection)
Ignition SystemTCI (Transistor Controlled Ignition)
Weight377 lbs
CoolingWater Cooled
Shaft LengthL = 20 inch, X = 25 inch

Related product manuals