EasyManua.ls Logo

Yamaha F200A - Predelivery Checks Procedures

Yamaha F200A
56 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
60L3D1X
8
Predelivery checks
1
To make the delivery process smooth and
efficient, the predelivery checks should be
completed as explained below.
Checking the fuel system
1. Check that the fuel hoses are securely
connected and that the fuel tank is full
with fuel.
CAUTION:
This is a 4-stroke engine. Do not use pre-
mixed fuel and 2-stroke outboard motor
oil.
Checking the gear oil
1. Check the gear oil level.
Checking the engine oil
1. Check the oil level.
NOTE:
If the engine oil is above the maximum level
mark (H), drain sufficient oil until the level is
between (H) and (L).
If the engine oil is below the minimum level
mark (L), add sufficient oil until the level is
between (H) and (L).
Checking the battery
1. Check the capacity, electrolyte level, and
specified gravity of the battery.
2. Check that the red and black battery
cables are securely connected.
S60L1060
S60L1070
Recommended engine oil:
4-stroke motor oil
API: SE, SF, SG, or SH
SAE: 10W-30 or 10W-40
Oil capacity:
Without oil filter replacement:
5.8 L (6.1 US qt, 5.1 Imp qt)
Battery capacity: 12 V100 Ah
Propeller selection / Predelivery checks
https://www.boat-manuals.com/

Other manuals for Yamaha F200A

Related product manuals