Yamaha F200A - Crankshaft and Crankcase Specs

60L3D1X
16
Valve lifters
Valve lifter outside diameter mm (in) 32.98–33.00 (1.2984–1.2992)
Valve lifter-to-cylinder head
clearance
mm (in) 0.02–0.05 (0.0008–0.0020)
Valve shims
Valve shim thickness
(in 0.020 mm increments)
mm (in) 2.320–2.960 (0.0913–0.1165)
Connecting rods
Small-end inside diameter mm (in) 21.00 (0.827)
Big-end inside diameter mm (in) 53.00 (2.087)
Crankpin oil clearance mm (in) 0.035–0.071 (0.0014–0.0028)
Big-end bearing thickness
Yellow mm (in) 1.492–1.496 (0.0587–0.0588)
Green mm (in) 1.496–1.500 (0.0588–0.0591)
Blue mm (in) 1.500–1.504 (0.0591–0.0592)
Crankshaft
Crankshaft journal diameter mm (in) 62.968–62.992 (2.4791–2.4800)
Crankpin diameter mm (in) 49.976–50.000 (1.9676–1.9685)
Crankpin width mm (in) 21.50–21.55 (0.8465–0.8484)
Runout limit mm (in) 0.03 (0.0012)
Crankcase
Crankshaft main journal oil
clearance
mm (in) 0.025–0.050 (0.0010–0.0020)
Upper crankcase main journal
bearing thickness
1 mm (in) 2.494–2.500 (0.0981–0.0984)
2 mm (in) 2.498–2.504 (0.0983–0.0986)
3 mm (in) 2.502–2.508 (0.0985–0.0987)
Lower crankcase main journal
bearing thickness
1 mm (in) 2.494–2.500 (0.0981–0.0984)
2 mm (in) 2.498–2.504 (0.0983–0.0986)
3 mm (in) 2.502–2.508 (0.0985–0.0987)
#3 main journal bearing
thickness (lower)
1 mm (in) 2.492–2.500 (0.0980–0.0984)
2 mm (in) 2.496–2.504 (0.0982–0.0986)
3 mm (in) 2.500–2.508 (0.0984–0.0987)
Item Unit
Model
F200AET FL200AET
Maintenance specifications
https://www.boat-manuals.com/