Operation
46
mote control models]. Be sure to check
that the tilt lock lever is in the lock/down
position (if equipped) before operating in
reverse.
Tiller handle models: The gear shift lever op-
erates only when the throttle grip is in the ful-
ly closed position.
To shift from in gear (forward/reverse) to
neutral
1. Close the throttle so that the engine
slows to idle speed.
2. After the engine is at idle speed in gear
move the remote control lever / gear
shift lever firmly and crisply into the neu-
tral position.
6BP-9-22-1E0.book 46 ページ ２０１０年２月９日 火曜日 午後３時５９分
To Next Page
Loading...
