USING
OTHER
FEATURES
SILENT CINEMA allows you to enjoy multi-channel
music or movie sound, including Dolby Digital and DTS
sources, through ordinary headphones. SILENT CINEMA
activates automatically whenever you connectheadphones
to the PHONES jack while listening to CINEMA DSP or
HiFi DSP sound field programs (see page 60). When
activated, the SILENT CINEMA indicator lights up in the
front panel display.
• SILENT CINEMA does not activate when "MULTI CH
INPUT"
is
selected
as
the input source (see page 35).
• SILENT CINEMA is not effective when the "DIRECT
STEREO" (see page 36) or "2ch Stereo" mode (see page 35) is
selected, or when this unit
is
in the "STRAIGHT" mode (see
page 35).
Press MUTE on the remote control to mute the
audio output. Press MUTE again to resume the
audio output.
•
You
can also rotate VOLUME on the front panel or VOLUME
+/-
on the remote control
to
resume the audio output.
•
You
can adjust the muting level by using the "MUTING TYP."
parameter in "SOUND MENU" (see page 77).
• The MUTE indicator flashes in the front panel display when the
audio output is muted and disappears from the front panel
display when the audio output
is
resumed.
If
you change the input source or the sound field program while
the audio output
is
being muted, this unit resumes the audio
output.
30
The night listening modes are designed to improve
listenability at lower volumes or at night. Choose either
"NIGHT:CINEMA" or "NIGHT:MDSIC" depending on
the type
of
material you are playing.
1 Press AMP and then press NIGHT on the
remote control repeatedly to select
"NIGHT:CINEMA" or "NIGHT:MUSIC".
NIGHT
~
Choices: NIGHT:CINEMA, NIGHT:MUSIC, OFF
• Select "NIGHT:CINEMA" when watching films to
reduce the dynamic range
of
film soundtracks and
make dialog easier to hear at lower volumes.
• Select "NIGHT:MDSIC" when listening to music
sources to preserve ease-of-listening for all sounds.
• Select
"OFF"
if
you do not want to use this feature.
,I,
':<i>":.
When a night listening mode
is
selected, the NIGHT
indicator lights up in the front panel display.
2 Press <I >on the remote control to adjust the
effect level while "NIGHT:CINEMA" or
"NIGHT:MUSIC" is displayed
in
the front
panel display.
PRESET/CH
Remote control
+
E::
·f·f
=:::
c·
t.
:=
L.
=.)
],
:
f='i
I
[)
Choices: MIN, MID, MAX
• Select "MIN" for minimum compression.
• Select "MID" for standard compression.
• Select "MAX" for maximum compression.
To Next Page
Loading...
Need help?
General
