Yamaha Commercial Audio LS9 StageMix V1.0 User Guide
Page 23
5.3 Connection Lost
If StageMix loses its connection to the LS9, the following message will appear.
Operation of StageMix is not possible while this message box is onscreen.
StageMix will automatically attempt to reconnect to the LS9. If this is
successful, StageMix will re-synchronize with the console data and operation
will become available again.
5.4 Graphic EQ Doesn’t Affect the Sound
If a Graphic EQ is assigned to an input or output channel but it doesn’t seem
to be affecting the sound on that channel, it could be that the Insert for that
channel has been switched Off. Check the state of the Insert ON switch in the
LS9 console.
To Next Page
Loading...
