Instrument and control functions
4-3
4
When the vehicle is turned on, the light
should come on and remain on until
the engine is started. Otherwise, have
a Yamaha dealer check the vehicle.
ECA21211
If the warning light comes on when
the engine is running, stop the en-
gine and check the oil level. If the oil
level is low, add sufficient oil of the
recommended type. If the warning
light remains on after adding oil,
stop the engine and have a Yamaha
dealer check the vehicle.
EAU85140
Engine trouble warning light “ ”
This warning light comes on or flashes
if a problem is detected in the engine.
If this occurs, have a Yamaha dealer
check the self-diagnosis system.
z When the vehicle is turned on, this
light should come on for a few
seconds and then go off. Other-
wise, have a Yamaha dealer check
the electrical circuit.
z The engine trouble warning light
will come on while the start switch
is pushed, but this does not indi-
cate a malfunction.
EAU69895
ABS warning light “ ”
This warning light comes on when the
vehicle is first turned on, and goes off
after starting riding. If the warning light
comes on while riding, the anti-lock
brake system may not work correctly.
EWA16043
If the ABS warning light does not
turn off after reaching 10 km/h (6
mi/h), or if the warning light comes
on while riding:
z Use extra caution to avoid pos-
sible wheel lock during emer-
gency braking.
z Have a Yamaha dealer check
the vehicle as soon as possible.
EAU67434
Shift indicator light “ ”
This indicator light comes on when it is
time to shift to the next higher gear.
The engine speeds at which it comes
on or goes off can be adjusted. (See
page 4-8.)
When the vehicle is turned on, this light
should come on for a few seconds and
then go off. If the light does not come
on, or if the light remains on, have a
Yamaha dealer check the vehicle.
UB5W10E0.book Page 3 Friday, March 27, 2020 12:34 PM
To Next Page
Loading...
