Periodic maintenance and adjustment
7-5
7
11 * Tires
• Check tread depth and for dam-
age.
• Replace if necessary.
• Check air pressure.
• Correct if necessary.
√√√√√
12 * Wheel bearings
• Check bearings for looseness or
damage.
√√√√
13 * Swingarm
• Check operation and for exces-
sive play.
√√√√
• Lubricate with lithium-soap-
based grease.
Every 24000 km (14000 mi)
14 Drive chain
• Check chain slack, alignment and
condition.
• Adjust and lubricate chain with a
special O-ring chain lubricant
thoroughly.
Every 1000 km (600 mi) and after washing the motorcycle, riding in the rain or
riding in wet areas
15 * Steering bearings
• Check bearing play and steering
for roughness.
√√√√√
• Lubricate with lithium-soap-
based grease.
Every 24000 km (15000 mi)
16 * Chassis fasteners
• Make sure that all nuts, bolts and
screws are properly tightened.
√√√√√
17
Brake lever pivot
shaft
• Lubricate with silicone grease. √√√√√
18
Brake pedal pivot
shaft
• Lubricate with lithium-soap-
based grease.
√√√√√
NO. ITEM CHECK OR MAINTENANCE JOB
ODOMETER READING (whichever comes first)
ANNUAL
CHECK
1000 km
or
2 months
4000 km
or
6 months
8000 km
or
10 months
12000 km
or
14 months
16000 km
or
18 months
UB1VE0E0.book Page 5 Tuesday, September 3, 2019 1:19 PM
To Next Page
