Yamaha MTM155 - Multi-Function Display

Instrument and control functions
4-6
4
EAUU2211
Multi-function display
The multi-function display is equipped
with the following:
z an odometer (ODO)
z two tripmeters (TRIP 1 and TRIP 2)
z a fuel reserve tripmeter (TRIP F)
z a clock
z an instantaneous fuel consump-
tion display (km/L or L/100 km)
z an average fuel consumption dis-
play (AVE_ _._ km/L or AVE_ _._
L/100 km)
z an average speed display (AVE_
_._ km/h)
z a backlight display (bL-01, bL-02
or bL-03)
Push the “SELECT” button to change
the display in the following order:
ODO → TRIP 1 → TRIP 2 → TRIP F →
clock → km/L or L/100 km → AVE_ _._
km/L or AVE_ _._ L/100 km → AVE_ _._
km/h → backlight (bL-01, bL-02 or bL-
03) → ODO
TIP
z The fuel reserve tripmeter appears
only when you are low on fuel.
z Push the “RESET” button to
change the display in the reverse
order.
EAU86890
Odometer
The odometer shows the total distance
traveled by the vehicle.
TIP
The odometer will lock at 999999 and
cannot be reset.
EAU88050
Tripmeters
The tripmeters show the distance trav-
eled since they were last reset.
To reset a tripmeter, change the dis-
play to the tripmeter you want to reset,
and then push the “RESET” button un-
til it is reset.
TIP
The tripmeters will reset and continue
counting after 9999.9 is reached.
1. Multi-function display
1
1. Odometer
1
1. Tripmeter
1
UB1VE0E0.book Page 6 Tuesday, September 3, 2019 1:19 PM