EasyManua.ls Logo

Yamaha MTM155 - Checking and Lubricating the Throttle Grip and Cable End; Checking and Lubricating the Brake and Shift Pedals

Yamaha MTM155
90 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Periodic maintenance and adjustment
7-26
7
EAUE1191
Checking and lubricating the
throttle grip and cable end
The operation of the throttle grip
should be checked before each ride. In
addition, the cable end should be lubri-
cated by a Yamaha dealer at the inter-
vals specified in the periodic
maintenance chart.
The throttle cable is equipped with a
rubber cover. Make sure that the cover
is securely installed. Even though the
cover is installed correctly, it does not
completely protect the cable from wa-
ter entry. Therefore, use care not to
pour water directly onto the cover or
cable when washing the vehicle. If the
cable or cover becomes dirty, wipe
clean with a moist cloth.
EAU44276
Checking and lubricating the
brake and shift pedals
The operation of the brake and shift
pedals should be checked before each
ride, and the pedal pivots should be lu-
bricated if necessary.
Brake pedal
Shift pedal
Recommended lubricant:
Lithium-soap-based grease
UB1VE0E0.book Page 26 Tuesday, September 3, 2019 1:19 PM

Table of Contents

Related product manuals