34
MW10
Select 16Bit
7. Select [VST Inputs] in the [Devices] menu.
The VST Inputs window will open. Engage
the Port [USB Audio CODEC] Active button
(
), and close the VST Inputs window.
8. Select [New project] from the [File] menu to
create a new project file.
The New Project dialog window will open. For this
example select [24 Track Audio Recorder] and click
[OK].
<Note>
Recorded Cubase LE data is stored as a “project file” for
each signals.
9. When the directory selection dialog window
appears, select the folder to which the
project and audio files for the project are to
be stored, and click [OK].
An empty 24-audio-track project window will appear.
10. Click [Project Setup] from the [Project]
menu.
To Next Page
Loading...
Need help?
General
