Recording Your Performance
P-105 Owner’s Manual
18
1
Press [REC] to engage Record Ready
mode.
The [REC] lamp will flash.
2
While holding down [PLAY], press [REC]
so that both the lamps flash.
To exit from this status, press any other button
such as [DEMO/SONG].
3
Press [PLAY], [REC], [L] or [R] to delete
the data of the entire Song.
After the operation is completed, both lamps turn
off.
To delete a specific Part:
1
While holding down [REC], press [L] or
[R] to engage the Record Ready mode.
The [REC] lamp will flash.
2
Press [PLAY] to start recording without
playing the keyboard.
3
Press [REC] or [PLAY] to stop recording.
All data recorded for the selected Part will be
deleted, and the lamp turns off.
Song Playback and Practice
All the Songs except for the Demo (page 14) let you turn on or off the [L] and [R] parts individually. By turning
off [R], for example, you can practice the [R] part while the [L] part is playing back, and vice versa.
1
Start playback of the desired Song.
To start the User Song, press [PLAY]. To start the
Preset Song, press one of the C2 – C#6 keys to
start playback while holding down [DEMO/
SONG]. For details on what Song number is
assigned to each key, see “Quick Operation
Guide” (page 22).
2
While holding down [PLAY], press [L] or
[R] repeatedly to turn the Part on/off.
3
Practice the part which is turned off.
4
Press [PLAY] to stop playback.
Deleting the Entire Song
• Selecting another Song will cancel the on/off status of the parts.
To Next Page
Loading...
