Yamaha P-95S - Using the Metronome; Adjusting Metronome Volume

Using the Metronome
P-95 Owner’s Manual
ENGLISH
15
Select a number starting from the left-most digit. For example, to set the
tempo “95,” press the F3 (0), D4 (9) and A#3 (5) keys in sequence.
Increasing the tempo value in steps of one:
While holding down the [METRONOME] button, press the F#4 key.
Decreasing the tempo value in steps of one:
While holding down the [METRONOME] button, press the E4 key.
Increasing the tempo value in steps of ten:
While holding down the [METRONOME] button, press the G4 key.
Decreasing the tempo value in steps of ten:
While holding down the [METRONOME] button, press the D#4 key.
Resetting the tempo to default:
While holding down the [METRONOME] button, press the F4 key.
The tempo value can also be changed by the following operation.
While holding down the [METRONOME] button, use the TEMPO [
gg
gg
]/[
hh
hh
]
button to increase or decrease in single steps.
While holding down the [METRONOME] button, press both TEMPO [
gg
gg
]/
[
hh
hh
] buttons simultaneously to restore the default tempo.
Adjusting the Volume
You can change the volume of the metronome sound.
While holding down the [METRONOME] button,
press one of the A-1–F##
##
0 keys to determine the vol-
ume.
Pressing a higher key in the key range results in a higher volume, while pressing
a lower key results in lower volume.
F3(0)
A#3(5)
D4(9)
G4(+10)
E4(-1)
D#4(-10)
F#4(+1)
F4(default)
Metronome volume range:
A-1 (1)–F#0 (10)
Default setting: D#0 (7)
NOTE
A-1(1)
F#0(10)
13