For your safety – pre-operation checks
5-2
5
Control cables
• Make sure that operation is smooth.
• Lubricate if necessary.
7-22
Drive chain
• Check chain slack.
• Adjust if necessary.
• Check chain condition.
• Lubricate if necessary.
7-20, 7-22
Wheels and tires
•Check for damage.
• Check tire condition and tread depth.
• Check air pressure.
• Correct if necessary.
7-15, 7-16
Brake pedal
• Make sure that operation is smooth.
• Lubricate pedal pivoting point if necessary.
7-23
Brake lever
• Make sure that operation is smooth.
• Lubricate lever pivoting point if necessary.
7-23
Centerstand, sidestand
• Make sure that operation is smooth.
• Lubricate pivots if necessary.
7-24
Chassis fasteners
• Make sure that all nuts, bolts and screws are properly tightened.
• Tighten if necessary.
—
Instruments, lights, signals
and switches
• Check operation.
• Correct if necessary.
—
ITEM CHECKS PAGE
UBKWE0E0.book Page 2 Tuesday, July 18, 2023 8:34 AM
To Next Page
