EasyManua.ls Logo

Yamaha PG-1 - Checking and Lubricating the Throttle Grip and Cable End; Checking and Lubricating the Brake Lever; Checking and Lubricating the Brake Pedal

Yamaha PG-1
78 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Periodic maintenance and adjustment
7-23
7
EAUE1191
Checking and lubricating the
throttle grip and cable end
The operation of the throttle grip
should be checked before each ride. In
addition, the cable end should be lubri-
cated by a Yamaha dealer at the inter-
vals specified in the periodic
maintenance chart.
The throttle cable is equipped with a
rubber cover. Make sure that the cover
is securely installed. Even though the
cover is installed correctly, it does not
completely protect the cable from wa-
ter entry. Therefore, use care not to
pour water directly onto the cover or
cable when washing the vehicle. If the
cable or cover becomes dirty, wipe
clean with a moist cloth.
EAU23155
Checking and lubricating the
brake lever
The operation of the brake lever should
be checked before each ride, and the
lever pivot should be lubricated if nec-
essary.
EAU23185
Checking and lubricating the
brake pedal
The operation of the brake pedal
should be checked before each ride,
and the pedal pivot should be lubricat-
ed if necessary.
Recommended lubricant:
Silicone grease
Recommended lubricant:
Lithium-soap-based grease
UBKWE0E0.book Page 23 Tuesday, July 18, 2023 8:34 AM

Table of Contents