Name: Yamaha QL Series
Brand: Yamaha
Rating: 4 (1 reviews)

To Next Page

To Previous Page

QL5/QL1 Firmware Update Guide 11

■About Failsafe Mode

The Dante module integrated in the QL may become unusable due to data corruption if the Dante

device is powered-off during a firmware update.

To recover from such a state, the Dante module will enter "failsafe mode."

To restore the Dante module from failsafe mode, a recovery image must be sent from the Firmware

Update Manager.

After the power is turned on, if the screen of the QL indicates "NETWORK AUDIO MODULE FAILED

AND WAS RESTARTED." and the Dante version is not displayed, it may be that the Dante module is

in failsafe mode.

Use Dante Controller to check whether the Dante module is in failsafe mode.

A Dante module that is in failsafe mode is shown as a red device name in the network grid view of

Dante Controller (version 3.1.x or later).

Other manuals for Yamaha QL Series

Questions and Answers:

Need help?

Do you have a question about the Yamaha QL Series and is the answer not in the manual?

General