Name: Yamaha QL Series
Brand: Yamaha
Rating: 4 (1 reviews)

To Next Page

To Previous Page

QL5/QL1 Firmware Update Guide 13

9. When the QL is detected, click the [Stop Scan] button.

If several minutes have passed without detection, use Dante Controller to check whether the cable might be

disconnected or broken, whether the TCP/IP settings are correct, and whether the QL is running.

10. Select the check box of the detected QL.

11. Click [Start].

A pop-up is displayed confirming that you wish to proceed.

12. Click [OK] to start the recovery.

Firmware Update Manager will display "Processing Safe Recovery", and then "Safe recovery Done" when the

device(s) are recovered.

Other manuals for Yamaha QL Series

Questions and Answers:

Need help?

Do you have a question about the Yamaha QL Series and is the answer not in the manual?

General