Yamaha RM1x - Page 136

136 RM1x SEQUENCE REMIXER
UTILITY MODE
n • System exclusive messages of 128 bytes or longer will not be echoed back.
❏ page2
2. MIDI Setup
■ Echo back settings :
Off Echo back will not be performed.
When connecting the RM1x’s MIDI IN and MIDI OUT connectors to an external MIDI device, select Off.
Through Echo back will be performed from the MIDI OUT connector.
RecMonitor Echo back will be performed according to the Out Channel MIDI OUT settings of the Keyboard Track or the Recording
Track.
When using an external MIDI keyboard and external MIDI tone generator to record on RM1x’s tracks, select
RecMonitor.
Parameter Values Function
TG param out OFF, ON When parameter values are modified in Voice submode or Effect
submode, this setting specifies whether the operation will be trans-
mitted in realtime from the MIDI OUT connector as MIDI data.
When set to OFF, MIDI will not be output.
Voice setup to TG OFF, ON Determines whether the corresponding voice and effect settings will
be sent to the RM1x tone generator when a song or style is se-
lected. The voice and effect settings are sent to the tone generator
when this parameter is “ON.”
Voice setup to MIDI OFF, ON Determines whether the corresponding voice and effect settings will
be transmitted via the MIDI OUT connector when a song or style is
selected. The voice and effect settings are transmitted via MIDI when
this parameter is “ON.”
* For information about how to change values, refer to the Basic Operation (page26).