Yamaha RM1x - Connecting a MTR (Multi-Track Recorder)

RM1x SEQUENCE REMIXER 19
❏ Connecting a MTR (multi-track recorder)
Since the RM1x implements MTC (MIDI Time Code) and MMC (MIDI Machine Control), you can produce music while
synchronized to a MTC- or MMC-compatible multi-track recorder.
Use MIDI cables to connect the MIDI OUT connector of the RM1x to the MIDI IN connector of the MTR, and the MIDI IN
connector of the RM1x to the MIDI OUT connector of the MTR.
If you use MTC or MMC to control an MTR, set the Utility mode MIDI page MIDI Sync setting to “MTC."
MTR
(MTC,MMC-compatible)
MIDI OUT
MIDI IN
MTR
(MTC,MMC-compatible)
MIDI IN
MIDI OUT
Synchronizing the RM1x by MTC from an external device
Controlling an external device via MMC from the RM1x
SETUP