25
ADD KX-E100 AND/OR MDX-E100 TO YOUR SYSTEM
English
1 Insert the desired disc into the CD player, and load a
blank tape into the KX-E100.
2 Press R.TIME repeatedly to select the length of tape
to be used. Each time you press R.TIME, the length
of the tape changes as follows:
• You can use numeric buttons to input the length of
the tape.
3 Press PROG to start programming.
•“A
B” appears in the display to indicate the
direction of the tape.
TAPE programming
By specifying the length of the tape, CDX-E200 programs
tracks or helps you to program tracks so they will fit onto
the tape with the least amount of unrecorded space
remaining at each end of the tape. There are three ways of
programming.
1 Manual TAPE programming
4 Select the desired track number using numeric
buttons.
• Repeat step 4 to continue programming tracks.
• The remaining time is shown on the display. If the
track is longer than the remaining time, “Error”
appears on the display.
5 Press R.TIME to continue programming tracks on
side B.
• Repeat step 4.
6 Press PROG to confirm the program.
7 Choose CD = TAPE by pressing DUBBING
MODE, and press DUBBING START to start
recording.
2 Automatic TAPE programming
1 Repeat steps 1 and 2 of “Manual TAPE
programming”.
2 Press REP to start programming.
• Programming is done in the order on the CD from
side A to side B. When complete, the programmed
track number and total time are indicated in the
display for 3 seconds.
3 Press PROG to confirm the program.
4 Choose CD = TAPE by pressing DUBBING
MODE, and press DUBBING START to start
recording.
3 Random TAPE programming
1 Repeat steps 1 and 2 of “Manual TAPE
programming”.
2 Press RANDOM to start programming.
• Programming of CD tracks is done randomly from
side A to side B. When complete, the programmed
track number and total time are indicated in the
display for 3 seconds.
3 Press PROG to confirm the program.
4 Choose CD = TAPE by pressing DUBBING
MODE, and press DUBBING START to start
recording.
To stop dubbing
Press & on CDX-E200 or & on KX-E100.
To cancel tape programming
Press & on CDX-E200 when dubbing is stopped.
DUBBING
START
DUBBING
MODE
PROG
R.TIME
REP
RANDOM
POWER
1 2 3
123
4 5 6
456
7 8 9
78
0 +10 +100
FREQ
/
RDS MODE
–
PTY SEEK
–
START
REP
RANDOM
PROG
ABC
TEXT
/
TIME
R. TIME
DE
TAPE
DIRECTION
PRESET
TUNER
PRESET
MD CD TAPE
AUX
MD
REC
/
PAU SE
TAPE
REC
/
PAU SE
MODE
SLEEP
DISPLAY
DUBBING
VOLUME
START
90 60
46 54
To Next Page
Loading...
