16
TSX-100
TSX-100
■ TEST MODE
The firmware version is displayed.
● Starting Service Mode
a. Connect the power cable of this unit to the AC power outlet.
b. Press the “INPUT/SNOOZE” key of this unit to turn on the power.
c. Press the “INPUT/SNOOZE” key of this unit repeatedly to select the CD.
Make sure that [No Disc] is displayed.
* While the disc is being played, press the “
AA
AA
A
/
FF
FF
F
(STOP/EJECT)” key to eject the disc.
d. While pressing the “MUTE” key of this unit, press the “
AA
AA
A
/
FF
FF
F
(STOP/EJECT)” key of this unit.
The SERVICE mode is activated and each firmware version is displayed at about 5 seconds intervals.
e. Press the “POWER OFF” key of this unit to turn off the power.
f. Disconnect the power cable of this unit from the AC power outlet.
● Starting Factory Reset
All settings are returned to initial settings.
a. Activate the Service Mode.
b. While the firmware versions are displayed, press and hold the “INPUT/SNOOZE” key for longer than 4 seconds.
c. [FACTORY SET] is displayed and the power is turned off automatically in about 4 seconds.
HOSTHOST
HOSTHOST
HOST
VERVER
VERVER
VER
071018-03U/U071018-03U/U
071018-03U/U071018-03U/U
071018-03U/U
SERVICESERVICE
SERVICESERVICE
SERVICE
MODEMODE
MODEMODE
MODE
DSPDSP
DSPDSP
DSP
VERVER
VERVER
VER
0707
0707
07
1010
1010
10
1616
1616
16
0101
0101
01
This is displayed when the SERVICE mode is activated.
The firmware version of the main microprocessor is displayed.
The firmware version of DSP is displayed.
The firmware version of USB is displayed.
(R, B, G models)
The firmware version of DAB is displayed.
(B model)
Ordinary display.
USBUSB
USBUSB
USB
VERVER
VERVER
VER
xxxx
xxxx
xx
xxxx
xxxx
xx
xxxx
xxxx
xx
xxxx
xxxx
xx
Destination
About 5 seconds
About 5 seconds
DABDAB
DABDAB
DAB
VERVER
VERVER
VER
xxxx
xxxx
xx
xxxx
xxxx
xx
xxxx
xxxx
xx
xxxx
xxxx
xx
3:53PM3:53PM
3:53PM3:53PM
3:53PM
NoNo
NoNo
No
DiscDisc
DiscDisc
Disc
About 5 seconds
About 5 seconds
To Next Page
Loading...
Need help?
General
