7-10
7
3. Insert the pins into the holes and secure
them with the wire loops. Make sure that
the handhold is properly secured before
riding.
Seat and shoulder bolsters
The seats and shoulder bolsters are designed
to help keep you in the vehicle. Do not put
your hand or arm on or outside of the shoul-
der bolster during operation. Your hand or
arm may be struck by objects or crushed
against outside objects or the ground during
a rollover.
1. Handhold support
2. Handhold bar
1. Wire loop
UBN57AE0.book Page 10 Tuesday, November 24, 2015 1:42 PM
To Next Page
Loading...
