Yamaha WOLVERINE 2015 - Drive System Operation

6-3
6
Do not turn the key to the “ ” (start) position
with the engine running; otherwise, damage
to the electric starter may result.
TIP
For maximum engine life, never accelerate
hard when the engine is cold!
EBU31910
Drive select lever operation and re-
verse driving
NOTICE
ECB02150
Do not shift without coming to a complete
stop and waiting for the engine to return to
normal idle speed. Damage to the engine
or drive train may occur.
Shifting: neutral to high and high to low
1. Stop the vehicle, and take your foot off
the accelerator pedal.
2. Apply the brake pedal, then shift by mov-
ing the drive select lever along the shift
guide. Make sure that the drive select le-
ver is completely shifted into position.
3. Release the parking brake, if applied.
4. Release the brake pedal and press the
accelerator pedal gradually.
1. Drive select lever
2. L (Low-range)
3. H (High-range)
4. N (Neutral)
5. R (Reverse)
1
2
5
4
3
UBN57AE0.book Page 3 Tuesday, November 24, 2015 1:42 PM